Gerber ADVANTAGE ROUTER 600, User Manual, Page: 75 / 114

System Preparation and Use 67
Clamping the Material
After attaching the workpiece to the sacrificial material on the table
mats, complete the following steps:
1. Press the slew key to move the router carriage to the back of
the router table.
2. Place the workpiece in the center of the router table.
3. Locate the work clamps in the tool kit. Each work clamp
consists of a T-nut, a clamp, and a knob-and-screw assembly.
4. Insert the knob-and-screw assembly through the center of the
clamp.