Administrator Mode
20
3
3.2 Events and Alerts
The Administrator can set up triggered actions, of either sending a snapshot by e-mail and/or
activate an output device upon input events.
For the abovementioned triggered actions, you must also configure the following settings:
Input Settings (See
3.2.1.1 Input Settings
)
E-mail (See
3.2.2 E-mail
)
3.2.1 I/O Control
After installing the I/O devices, you need to enable the I/O settings on the camera. For
connecting I/O devices to the camera, see
1.3 Overview
.
3.2.1.1 Input Settings
To activate the sensor input, select
Enable
.
Figure 3-6
Name:
Type a desired name for the input.
Normal State:
Select the initial state of the sensor input between
Open Circuit (N/O)
/
Grounded Circuit (N/C)
.
E-Mail Output:
Enable this option to send alerts to the e-mail address specified upon
input events. See
3.2.2 E-mail
to set up the e-mail server.
I/O Output:
Enable this option to trigger the output device upon input events. See
3.2.1.2
Output Settings
to set up the output device.
