19
3.1.4 RTSP
Enabled by default, you can modify the RTSP protocol settings to match your network
environment or enable RTSP authentication for improved security.
Figure 3-5
[Enable Audio]
Turns audio streaming on or off.
[Authentication]
The ID and password of the camera are required to access the camera
through RTSP connections. This function is disabled by default.
[RTSP / TCP Port]
Keep the default value or modify it as needed, from 1024 ~ 65535.
[RTP / UDP Port]
Keep the default value or modify it as needed, from 1024 ~ 65335.
[Max Connection]
Set the maximum number of RTSP connections to the camera, from 1 ~ 8.
Note:
1. When the GV-VR360 is connected to a video management software and/or app,
changing its RTSP settings may result in temporary disconnection or image freeze,
for about 40 ~ 60 seconds
2. For RTSP commands of GV-VR360, see
Appendix A
.
3.1.5 Live
You can enable live streaming of the camera’s image through YouTube. For details, see
Chapter 4 YouTube Live Stream
.
