GeoVision GV-SNVR3203 User Manual Download Page 84

Page: 84 / 170

2. Select a type from the

Type

drop-down list in the upper right

corner.

3. Select the desired camera(s), set the desired time period, and

then click

Search

4. Click the desired file to start playback.

7.11 File Management

File management allows you to manage video clips, tags, snapshots

taken during playback, and lock or unlock files.

1. Take snapshot during playback.

A. In playback page, play the recording until the desired image

appears.

B. Click

in the playback window to take a snapshot.

C. Click

and then click the Playback Image tab to view the

snapshot.

D. Select the desired image file(s) and then click Backup to

save them to the storage device.

NOTE!

The image resolution depends on the resolution from the
output interface and the number of windows displayed when
the snapshot is taken.

Summary of Contents for GV-SNVR3203











































































































































































Search results

Summary of Contents for GV-SNVR3203

Reviews:

Related manuals for GV-SNVR3203

Brands by name

Popular brands

GeoVision GV-SNVR3203, User Manual

Search results

Summary of Contents for GV-SNVR3203

Reviews:

Related manuals for GV-SNVR3203

Brands by name

Popular brands