GeoVision GV-SNVR3203 User Manual Download Page 81

Page: 81 / 170

7.5.2 Playback by Tag

1. In the playback window, click

Video Retrieval

, select

Tag Search

from the drop-down list in the upper left corner.

2. Select cameras, set the time period, and then click

Search

Search results, if there are any, are displayed with names of

cameras and tags.

3. Click

for the desired tag to start playback. You may configure

Set Time

to set when the tagged video starts and ends.

7.6 Playback by Motion Detection

Search for and play recordings triggered by motion detection during a

specified time period.

NOTE!

Make sure motion detection is enabled and alarm-triggered
recording has been configured before you use this function.
See

9.2 Motion Detection

and

9.10 Alarm-Triggered Actions

for details.

1. In the playback window, click

Video Retrieval

, select

Motion

from the drop-down list in the upper left corner.

2. Select the desired camera, set the time period, and then click

Search

3. Click

for the desired recording to start playback.

Summary of Contents for GV-SNVR3203











































































































































































Search results

Summary of Contents for GV-SNVR3203

Reviews:

Related manuals for GV-SNVR3203

Brands by name

Popular brands

GeoVision GV-SNVR3203, User Manual

Search results

Summary of Contents for GV-SNVR3203

Reviews:

Related manuals for GV-SNVR3203

Brands by name

Popular brands