97
10.1.4 People Flow Counting
People flow counting is used to count people entering or leaving an
area.
1. Draw a virtual line on the screen to set the minimum width of
detection. People narrower than the set width will be ignored.
2. Click the
Draw
button and then draw rules on the left. Set
entrance direction and sensitivity as needed.
3. Select the desired counting type, including Total/People
Enterted/People Exited.
4. For Reporting Interval(s), set the time interval for reporting people
counting data.
5. By selecting
Enable Clear by Schedule
, you can have people
counting OSD reset at a specified time every day. You may also
click
Clear Counting Result
to clear the OSD immediately.
Resetting people counting OSD only changes the OSD. It does
not change report statistics.
6. Click
Apply
to save the settings.
