GeoVision GV-SNVR3203 User Manual Download Page 12

Page: 12 / 170

Before You Begin

Please be aware that the parameters that are grayed out on the

system user interface (UI) cannot be modified. The parameters and

values displayed may vary with device model, and the figures in this

manual are for illustration purpose only.

1.1 User Login

Use the default username

admin

and password

123456

for your first

CAUTION!

The  default  password  is  intended  only  for  the  first  login  and
should  be  changed  to  a  strong  one  containing  at  least  nine
characters  including  letters,  digits  and  special  characters
after your first login to ensure security.

1. Right-click anywhere in the window and then choose

Menu

. The

2. Select the username from the drop-down list, enter your password,

and then click

Login

Summary of Contents for GV-SNVR3203











































































































































































Search results

Summary of Contents for GV-SNVR3203

Reviews:

Related manuals for GV-SNVR3203

Brands by name

Popular brands

GeoVision GV-SNVR3203, User Manual

Search results

Summary of Contents for GV-SNVR3203

Reviews:

Related manuals for GV-SNVR3203

Brands by name

Popular brands