Getting Started
3
Using Rocker Switch to Simulate ACC Ignition
For quick control of turning on or off the GV-Mobile NVR System, you can install a rocker
switch to the 3-pin terminal block with the optional power adapter. For the connection and
operation, follow the steps below.
Rocker
Switch
Figure 3-4
1. For the 3-pin terminal block with optional power adapter, unplug the U-shaped wire from
the Power and Ignition pins.
U-Shaped
Wire
Power
Ignition
Ground
Figure 3-5
2. Connect the wires of the rocker switch to the Power and Ignition pins respectively.
Figure 3-6
11
