GeoVision GV-Mobile NVR System User Manual Download Page 65

Page: 65 / 77

3. If the Windows hard disk utility still cannot fix the problem in Partition C, try rebuilding the

operating system and GV-System Software by running the recovery from the hidden
partition. Refer to

Chapter 4 System Restoration

Live video is not displayed smoothly.

If some of live videos are not displayed smoothly, check the following status:

1. Check the bandwidth status of the network that is connected to the GV-Mobile NVR

System.

2. Check if several users are accessing the Web interface of the GV-IP camera. Try to

close some of open Web interfaces.

Unable to locate all the GV-IP cameras by using the IP Device Utility.

If you can not locate all the GV-IP cameras by using the IP Device Utility, try the following
instructions:

1. Ensure all the GV-IP cameras are connected to the same LAN with the GV-Mobile NVR

System and check the network connectivity.

2. Ensure you have powered on all the GV-IP cameras.

3. Click the Search button of the IP Device Utility again to detect the GV-IP cameras.

Black images are displayed.

1. Check the IP cameras and make sure they are functioning well.
2. Check the GV-Mobile NVR System’s connection over network.

How can I find more help?

Visit our website at

http://www.geovision.com.tw/english/4_1.asp

Write us at

[email protected]

Summary of Contents for GV-Mobile NVR System














































































Search results

Summary of Contents for GV-Mobile NVR System

Reviews:

Related manuals for GV-Mobile NVR System

Brands by name

Popular brands

GeoVision GV-Mobile NVR System, User Manual

Search results

Summary of Contents for GV-Mobile NVR System

Reviews:

Related manuals for GV-Mobile NVR System

Brands by name

Popular brands