GeoVision GV-Mobile NVR System User Manual Download Page 28

Page: 28 / 77

Getting Started

3.3 Installing the Storage Drive

The GV-Mobile NVR System uses SATA hard drive / SSD for video data storage. Before
recording, be sure to install the storage drive.

3.3.1 GV-MNVR1000 System

1. Loosen the thumb screws on the HDD/SSD slot and pull out the drive drawer.

Figure 3-8

2. Insert the storage

drive into the drive drawer with the SATA data and power connector

facing towards the end.

Power

Connector

Figure 3-9

3. Secure the storage

drive with the drive drawer using the supplied 4 screws.

Figure 3-10

Note:

For convenience, it is suggested to secure the screws with the drive drawer being

placed downward.

4. Insert the drive drawer into the HDD/SSD slot and secure the thumb screws.

Summary of Contents for GV-Mobile NVR System














































































Search results

Summary of Contents for GV-Mobile NVR System

Reviews:

Related manuals for GV-Mobile NVR System

Brands by name

Popular brands

GeoVision GV-Mobile NVR System, User Manual

Search results

Summary of Contents for GV-Mobile NVR System

Reviews:

Related manuals for GV-Mobile NVR System

Brands by name

Popular brands