GeoVision GV-Mobile NVR System User Manual Download Page 53

Page: 53 / 77

3.12.5 Setting Live View with Pop-up Alert

You can set a different live view mode with pop-up alert together for each monitor. When alert
events occur, the live video of the associated camera will pop up on the assigned monitor to
replace its live view mode.

1. To configure live view mode, follow the instructions in

3.12.2 Setting Live View

2. To configure pop-up alert, in the upper left column, click

Event Popup

. Figure 3-44

appears.

3. Configure

Motion Trigger

I/O Trigger

Popup Dwell Time

and

Popup Interruption

Interval

for each monitor. For details

see

3.12.4 Setting Pop-up Alert.

4. Click the

Matrix

icon and return to Figure 3-42. Ensure the

Live Mode

option is selected.

5. Click

. The live view mode you configured for each monitor is displayed.

6. Start monitoring. When alert events occur, the associated camera will pop up on the

desired monitor.

Summary of Contents for GV-Mobile NVR System














































































Search results

Summary of Contents for GV-Mobile NVR System

Reviews:

Related manuals for GV-Mobile NVR System

Brands by name

Popular brands

GeoVision GV-Mobile NVR System, User Manual

Search results

Summary of Contents for GV-Mobile NVR System

Reviews:

Related manuals for GV-Mobile NVR System

Brands by name

Popular brands