Introduction
39
1
2. Loosen the knobs by turning it anticlockwise.
Loosen the knob
Long Screw
Figure 1-60
3. Attach the box to the wall with the knobs pointing down and use a marker to mark 4 dots.
4. Drill 4 holes according to the marks.
5. Insert 4 screw anchors to the holes and secure the to the wall with 4 long screws.
6. Thread the camera cable through the box cover and secure the camera to the cover with
4 short screws.
7. Reattach the box cover to the power box, as shown in No. 7,
Figure 1-61.
8. Thread the Ethernet cable through the PG21 conduit connector and the power box as
shown in No 8,
Figure 1-61
. Then connect the cable to the camera. To waterproof the
cable, see
1.8 Waterproofing the Cable
.
9. Rotate the plastic ring to secure the conduit connector to the power box. Secure in the
cap, as shown in No 9,
Figure 1-61
10. Secure the box cover to the power box, as shown in No 10,
Figure 1-61.
Cap
10
7
Plastic Ring
13
9
8
Figure 1-61
Summary of Contents for GV-ABL Series
Page 14: ......