GeoVision 520-R1251-000, User Manual

Page: 6 / 41

iv
2.3.2 Connecting through RS-485 Interface ..........................................................19
2.3.3 Defining Readers on GV-AS Controller Web Interface..................................20
2.4 Installing the GV-R/RK/DFR Config AP ..................................................................22
2.5 Overlaying Card Numbers on GV-DVR/NVR Live View ..........................................23
2.5.1 Defining the ID Number and Setting the Reader to Slave .............................23
2.5.2 Adding the Reader to GV-DVR/NVR ............................................................25
2.6 Changing the Default Settings of Beeper and LED .................................................26
2.6.1 Setting up Beeper and LED on GV-R/RK/DFR Config AP ............................26
2.6.2 Wiring the Beeper and LED to the GV-AS Controller ....................................28
2.6.3 Configuring the Beeper and LED Settings for Each Door/Gate.....................29
2.7 Setting UID or GID on GV-R/RK/DFR Config AP....................................................30
2.8 Firmware Upgrade..................................................................................................32
2.9 Specifications .........................................................................................................33
2.9.1 The Number of Readers Supported by GV-AS Controllers ...........................34
2.10 Accessory (GV-RK1352 and GV-R1352 Only)......................................................35