GV-Reader1251 / 1352 V2 and GV-SR1251
7
1
Defining Readers on GV-AS Controller Web Interface
After configuring the switch settings of GV-Reader1251 / 1352 V2 or defining the ID number
of GV-SR1251 with the GV-Reader Config Utility, you need to specify which door each
reader controls on the Web interface of the GV-AS Controller.
1. Type the GV-AS Controller’s IP address in the Web browser.
2. Type the username and password to login.
3. In the left menu, click
Extended Reader
. This page appears.
4. If the readers are connected using RS-485, select the
RS485
checkbox in front of the ID
number. The ID number must match the ID you configured using SW5 – SW7 (for GV-
Reader1251 / 1352 V2) or GV-R/RK/DFR Config AP (for GV-SR1251).
5. Leave the serial number field blank.
6. Select a door/gate for the reader under
Function
. Click
Submit
.
