GV-RK1352 / R1352 / DFR1352 Card Reader
21
2
4. Next to
Read Mode
, select
Read UID
or
Read GID
to set the connected readers to read
UID (unique identifier) or GID (GeoVision ID) on GV-AS ID Cards / Key Fobs.
If you select
Read GID
, make sure there are two numbers on your GV-AS ID Cards / Key
Fobs as shown below. If there is only one number on your GV-AS ID Cards / Key Fobs,
GID is not supported, and you must select Unique Identification (UID).
5. Click
Submit
.
Note:
1. When you click
Submit
on the Extended Reader page of a GV-AS1010 / 210 / 2110 /
2120 / 410 / 4110 / 810 / 8110,
all readers connected through RS-485 interface will
reboot.
2. GID ID format is only supported in GV-RK1352 / GV-R1352 / GV-DFR1352 (Rev. B)
V1.2 or later.
3. If you are using third-party cards or key fobs, you must set the reader to read UID.
