7
SLICING AND GRATING CUTTING CYLINDERS
Your Slice & Go comes with 3 cutting cylinders. See the
SLICING AND GRATING CUTTER FOOD RECOMMENDATIONS
SLICER
COARSE
GRATER
FINE
GRATER
Beetroot, radish, carrot, zucchini, potato, sweet potato
ü
ü
ü
Fennel, celery, onion, cabbage, apple, cucumber
ü
ü
Pear (firm), tomato (firm), long chilli, lemongrass, peppers
ü
Ginger, garlic, galangal, turmeric
ü
ü
Hazelnuts, walnuts, almonds, cashews, peanuts, macadamia nuts
ü
ü
Hard cheeses (eg. parmesan, gouda, pecorino)
ü
ü
Hard boiled egg (cold)
ü
Chocolate (cold)
ü
ü
Biscuits, dry bread (for breadcrumbs)
ü
ü
DISASSEMBLY
1.
Switch the appliance off (O) and unplug it.
2.
Turn the body 45° clockwise, aligning the arrow ( ) on the motor base with the
unlock symbol ( ) on the body to disengage the bayonet fittings, and pull it off
the motor unit.
3.
Turn the ring nut 10mm clockwise, to unlock it, and lift it of the body.
4.
Gently tilt the body onto your bench-top so that the cutter drops out.
TROUBLESHOOTING:
Jamming. If your unit is jamming:
1.
Switch the appliance off (0) and unplug it.
2.
Dismantle the appliance, clean it, assemble it, and start again.
Noise. If you find the appliance is noisy:
1.
the cutter may be rubbing against the ring nut.
2.
Applying a little cooking oil to the inside of the ring nut before use should fix this.
GFC150_IB_FA_300413.indd 7
30/04/13 12:00 PM
