GEORGE FISCHER +GF+ SIGNET 9020 Intelek-Pro, Instruction Manual

Page: 8 / 44

• Stores a menu item into memory after modification
• Displays available output options while batch cycle is stopped (only)
1.5 Front Panel Description
Item 11:
Remove front bezel
to change unit tags
under clear window.
The unit tags are
located inside the
rear cover of the
manual.
ENTER
CAL
2. LCD
Displays:
4
.
5.
1.
Annuncia-
tors:
• Indicate activation status of output relays 1 & 2
• Indicates batch volume or flow rate shown on the main display
• Shows batch, flow rate, calibration, setup, and relay activation status
information
• Used in conjunction with MOD key to access the CAL menu
• Accesses the "view-only" menu during or after a batch cycle
ENTER MOD
FLOW
CAL START STOP
RLY 1
RLY 2
+GF+ SIGNET
BATCH CONTROLLER
GPM
BATCH
RESUME
3
5
6
4
1
7
8
9
10
11
BATCH
FLOW
2
GAL
STOP
7.
START
6.
• Starts the batching cycle and energizes relays 1 and relay 2
• Stops batch cycle in progress
• De-energizes any active relay
8.
• Resumes a previously stopped batch cycle
• Decreases the value of a selected digit in CAL or BATCH menus
RESUME
9.
BATCH
• Selects batch display during normal operation
• Used in conjunction with the MOD key to access the BATCH menu
• Increases the value of a selected digit in CAL or BATCH menu
10.
MOD
3.
• Accesses one of two menus: CAL or BATCH
• Selects a menu item for modification
• Restores a menu item to original value after modification
FLOW
• Selects flow rate display during normal operation
• Selects a digit for modification in CAL or BATCH menus
2
Operational Function Item