CAL Menu Functions
Batch Menu Functions
1.
K-factor
1.
Batch size
2.
K-factor decimal
2.
Batch decimal
3.
Flow display timebase
3.
Batch mode: continuous or quantity
4.
Flow display averaging
4.
Batch quantity (number of batches)
5.
Flow display decimal
5.
Batch time delay (between batches)
6.
Totalizer display mode:
6.
Batch display mode: count up or down
flow volume or batch count
7.
Displayed engineering units: actual or
7.
Totalizer reset
percent of batch
8.
Totalizer multiplier
8.
Relay mode: 2-stage mode
or overrun
9.
Display contrast
alarm mode
(see notes below)
10. Security code
11. Auto cal mode
(see note below)
Auto cal options if selected
2-stage relay mode if selected
• Press start
• Relay 2 setpoint
• Press stop
• Enter volume
• Volume decimal
Overrun alarm relay mode if selected
• New K-factor
• Overrun volume
• Batch compensation volume
• Overrun decimal
Refer to sections 3.2 and 3.3 for detailed menu function descriptions.
12
3.1 Introduction
All the functions which can be modified are con-
tained in two setup menus:
The CAL menu
contains those functions which
pertain to the sensor input frequency and how it is
interpreted by the instrument. The CAL menu also
provides access to the security code and display
contrast features.
The BATCH menu
contains those functions which
pertain to the batching process and relay opera-
tion.
Chapter 3
System
Configuration
Figure 12
CAL/BATCH setup menu
functions
Summary of Contents for +GF+ SIGNET 9020 Intelek-Pro
