GEORGE FISCHER +GF+ SIGNET 9020 Intelek-Pro, Instruction Manual

Page: 26 / 44

• Press:
ENTER
when complete. Display shows
new K-factor. Record in space provided (left).
• Press:
ENTER
to store new K-factor in memory,
OR
• Press:
STOP
to re-enter measured volume
(step 4), OR
• Press:
MOD
to cancel Auto Cal. The original
K-factor will be restored.
5. Display shows overrun compensation volume.
• Press:
BATCH RESUME
FLOW
to modify overrun
compensation volume (if desired).
• Press:
MOD
to show previous overrun volume
and repeat step 5, OR
• Press:
STOP
to re-enter measured volume
(step 4),
OR
• Press:
ENTER
to accept value shown.
• Press:
FLOW
to return to normal operation.
Record new K-factor:
Note:
Overrun compensa-
tion decimal same as BATCH
decimal setting.
Disable overrun
compensation?
To disable overrun compensa-
tion function enter 0000 .
ENTER MOD
FLOW
CAL START STOP
RLY 1
RLY 2
BATCH CONTROLLER
GPM
BATCH
RESUME
BATCH
FLOW
GAL
9020
Sensor
Valve
20
0
40
60
80
100
Start Stop
valve
opens
valve
closes
flow rate
=overrun
volume
Valve timing
RELAY 1
20