FIELD REPAIR/SERVICE
BLANKETROL II, Model 222S
OPERATION AND TECHNICAL MANUAL
Page 95 of 110
SECTION 6.
PARTS INFORMATION
6-0. INTRODUCTION
This section outlines information for ordering, shipping and replacing parts of the
BLANKETROL II unit, Model 222S. Identification of parts and components are shown in
Figures (6-1.) and (6-3.). The numbers in Figures (6-2.) and (6-4.) correspond to the numbers
in the left column of the accompanying parts list in Figures (6-1.) and (6-3.). Figures (6-5.) to
(6-8.) diagram the functional operation of the unit and Figure (6-9.) lists the BLANKETROL II
System equipment and accessories.
6-1. ORDERING INFORMATION FOR REPLACEMENT PARTS
Replacement parts are available directly from CSZ or through our authorized BLANKETROL II
dealer. When ordering parts, specify the replacement part number as well as the serial
number of your unit located on the identification plate on the rear bumper. There is no
minimum order requirement for replacement parts. Section (6-2.) outlines the recommended
replacement parts inventory.
It is strongly recommended that all parts be replaced with parts purchased from CSZ or
Healthlink Europe. Use of other parts could void the warranty on the unit and possibly
damage the unit.
6-2. RECOMMENDED REPLACEMENT PARTS INVENTORY
Qty.
Description
1
1/8" Quick-disconnect Socket Fitting
1
1/8" Quick-disconnect Plug Fitting
1
Water Level Sensor Assy.
1
3C Pump Housing Assy.
1
Water Temp. Sensor
1
Hi Temp Thermostat
1
Heater - 800W (115V)
1
Heater - 800W (230V)
1
Water Filter Assy.
1
Nylon Strap Assy.
1 pkg of 5 (37091)
15 Amp Fuse** (115V)
1 pkg of 5 (37092)
250 mAmp Fuse** (115V)
1 pkg of 5 (37088)
8 Amp Fuse** (230V)
1 pkg of 5 (37089)
125 mAmp Fuse** (230V)
1 pkg of 5 (37058)
½ Amp Slow Blow Fuse (115V)
1 pkg of 5 (37059)
¼ Amp Slow Blow Fuse (230V)
**ONLY
“UL Listed” fuses are to be used.
Summary of Contents for CSZ Blanketrol II 222S
Page 112: ......
