![background image](http://html.mh-extra.com/html/genius/ipcam-350tr/ipcam-350tr_user-manual_2213176008.webp)
English
-
8
-
Software installation
At the end of the hardware installation, the Administrator must place the product software CD into
the CD-ROM driver of the PC running in MS Windows. An auto-run program will pop up (if the
program is not on auto-run, go to the root directory of the software CD and click on autorun.exe.
PTCam IP Finder
When you installed your Network camera on your
LAN environment
, you may install “IP Finder”
to discover the Network camera’s IP address. The Administrator must place the product software
CD into the CD-ROM drive of the PC running in Microsoft Windows. An auto-run program will pop
up.
Click on “Install IP Finder” to run the “IP Finder” program.
NOTE
If the program is not on auto-run, go to the root directory of the software CD and click on
“autorun.exe”.
The PC’s IP address must correspond with the IPCam 350TR’s IP address in the same segment
for the two devices to communicate. Therefore, if your PC’s IP address does not correspond with
the IPCam 350TR’s IP address, you must modify your PC’s IP address.
The default settings are as follows:
(DHCP off)
-
Default IP – 192.168.0.99 (1~98)
-
Subnet Mask – 255.255.255.0
-
Default Gateway – 0.0.0.0
Summary of Contents for IPCam 350TR
Page 1: ...English IPCam 350TR Pan Tilt Infared LED User s Manual Version 1 0 ...
Page 14: ...English 14 ...
Page 15: ...English 15 ...