![background image](http://html.mh-extra.com/html/genius/ipcam-350tr/ipcam-350tr_user-manual_2213176011.webp)
English
-
11
-
Install the Camera behind a NAT Router
The Network Camera can be used with a router. This section explains how to view the camera
from either the Internet or from inside your LAN. If the Network Camera was installed on the LAN
with a router, then it can get a dynamic IP address from the DHCP server. However, if the
Network Camera wants to be accessed from the WAN, its IP address needs to be setup as fixed
IP, also the Virtual Server function of router needs to be setup.
Installing a Network Camera with a router on your network is an easy 3–step procedure:
(1) Assign a local IP Address to your Network Camera
(2) Access the Router with Your Web browser
(3)
Open Virtual Server Ports for Your Router (Enable Remote Viewing)
1. Assign a local fixed IP address to your Network Camera
Follow the steps in the
Quick Installation Guide
to configure the Network Camera. The camera
will be assigned a local fixed IP Address that allows it to be recognized by the router. Manually
setup the Network Camera as fixed IP, for example, such as
192.168.0.20
.
2. Access the Router with Your Web browser
The following steps generally apply to any router that you have on your network. The D-Link
DI-624 is used as an example to clarify the configuration process. Configure the initial settings of
the DI-624 by following the steps outlined in the
DI-624
Quick Installation Guide
.
If you have cable or DSL service, you will most likely have a dynamically assigned WAN IP
Address. ‘Dynamic’ means that your router’s WAN IP address can change from time to time
depending on your ISP. A dynamic WAN IP Address identifies your router on the public network
and allows it to access the Internet. To find out what your router’s WAN IP Address is, go to the
Status
screen on your router and locate the WAN information for your router. As shown on the
following page the WAN IP Address will be listed. This will be the address that you will need to
type in your web browser to view your camera over the Internet. Be sure to uncheck the
Reset IP
address at next boot
button at the top of the screen after modifying the IP address. Failure to do
so will reset the IP address when you restart your computer.
Your WAN IP Address will be listed here.
Summary of Contents for IPCam 350TR
Page 1: ...English IPCam 350TR Pan Tilt Infared LED User s Manual Version 1 0 ...
Page 14: ...English 14 ...
Page 15: ...English 15 ...