background image

ENGLISH

Genius Car Alarm

www.geniuscaralarm.com

31

Genius Car Alarm 

                                                                   

www.geniuscaralam.com                                                                     9 

 

 

HORN OUTPUT 

 

Normally, in alarms the sound is produced by a siren (Positive Output),  with this new 

system, we can simultaneously drive the horn’s sound (Negative Output), or select one of 

the two functions. 

See programming Table 

 

VALET MODE 

Valet, it is the function that allows us to cancel temporarily our security system, for those 

situations in which we do not want to use the alarm system, for example in the car washer, 

while in maintenance services, etc. 

  

1

Valet by Remote Control 

    a.  While the alarm is disarmed, press 

BUTTON 4 

once.  Within 3 seconds, press 

BUTTON 3 

for 2 seconds.  

    b. The LED will light solid and the siren will chirp 5 times, confirming that the system is 

in Valet mode.   

    c. If the system is in Valet mode: If we press 

BUTTON 1, 

the doors will be locked and 

the lights will flash once if 

BUTTON 2 

is pressed, the doors will be unlocked and the 

lights will flash twice.     d. To exit Valet mode, apply the previous mentioned procedure.  

     *The LED will turn off. 

  

 

2

Valet by Reset Switch. 

    

a.  When the ignition key is in ON position, keep pressing  reset switch until the siren 

chirp 5 times.  

    b. The LED will light solid confirming that the system is in Valet mode.  

    

c. To exit Valet mode, apply the previous mentioned procedure.   

  * The LED will turn off.  

  

DOORS LOCK WITH IGNITION 

The overall alarm system offers us a comfortable and secure operation, and this function is 

one of them.   

a. After the engine ignition is on, the doors will be locked 2 seconds later.  

b. Once the engine is turned off, the doors will be unlocked immediately.  

 

DOOR

 

LOCKS’

 

CONTROL

 

WITH THE TRANSMITTER

 

WHILE DRIVING  

While driving, if we press 

button 1, 

the doors will be locked; and if we press 

button 2

, the 

doors will be unlocked.  

 

 

FUNCTIONS’ SELECTION

 

- JUMPERS 

Important: All the Jumper’s selections have to be determined before installation. 

 

JUMPER 

MODE 

DEFAULT FABRIC 

CONFIGURATION  

      MODE 

VARIANTS 

J1: AUTOMATIC ARMING /  

MANUAL ARMING 

 

AUTOMATIC ARMING 

 

MANUAL ARMING 

J2: DOOR LOCKS’ TIME 

     

 

0.5 SECONDS 

 

DOUBLE PULSE

 

Summary of Contents for G24 Si

















Reviews: