ENGLISH
Genius Car Alarm
www.geniuscaralarm.com
30
Genius Car Alarm
8 www.geniuscaralam.com
16 to 30 seconds
, the LED twinkles slowly.
31 to 45 seconds
, the LED will flash rapidly, the siren will chirp once every two
seconds and the lights will flash once every second.
46 to 70 seconds
, the LED will flash rapidly, the siren will chirp once every second
and the lights will flash once every second.
After 70 seconds
, the siren and the lights will trigger, the engine interrupter will be
activated.
b. When the anti-hijacking is triggered, (the ignition remains in ON position). Even if the
ignition key is turned to OFF position, the siren and the lights remain triggered for 3
minutes.
c. If the ignition key is turned to ON position again, the siren and the lights will be
triggered again.
*To exit Anti-hijacking mode:
APPLY THE DISARMING EMERGENCY PROCEDURE
AUTOMATIC ARMING
This function provides us with a greater confidence in our alarm, giving us security and
tranquility because of the alarm’s complete protection.
With this function we can assure that the system will arm automatically in case we forget to
do so.
* For more security, it is recommended to arm the system with the remote control.
a. After turning the ignition key to ON position and closing the doors, 30 seconds later the
alarm will be automatically armed.
* See
Jumper 1
selection for MANUAL / AUTOMATIC Arming
* See Programming Table for Automatic Arming Programming with doors lock.
AUTOMATIC REARMING
When the alarm is disarmed with the remote control, without turning the ignition key to ON
position and without opening the doors, 30 seconds later the alarm will be re-armed and
the doors will be locked.
CHANNEL 2 (TRUNK)
a. When the alarm is disarmed:
CHANNEL 2,
BUTTON 4
FOR 3 SECONDS, the signal is triggered (The trunk will be
opened)
b. When the alarm is armed:
Activating channel 2, first the alarm will be disarmed and then the signal is triggered. (The
trunk will be opened)
* See Programming Table
CHANNEL 3
With this signal we can control a function (connecting an additional- optional module) such
as a window module, or the engine ignition.
Press buttons
3
and
4
together for two seconds to activate the function. (If the buttons are
pressed for more time, the signal is applied; releasing the buttons will stop the signal)
* See Programming Table
SECOND PULSE TO UNLOCK DOORS
If we wish to control the doors lock as AGENCY TYPE, with this function we can do it.
Disarming the alarm pressing the
Button 2
once, only the driver’s door will be unlocked. If
we press
Button 2
again, within three seconds the others will be unlocked.
*See Programming Table
