ENGLISH
Genius Car Alarm
www.geniuscaralarm.com
33
Genius Car Alarm
www.geniuscaralam.com 11
6
OUTPUTS FOR CHANNEL 3
Second Pulse to
Unlock Doors
CHANNEL 3
HORN
OUTPUT
(
-)
7
Anti-hijacking Warning
*Indicates the beginning of the
sequence
YES
NO
8
ARMED and DISARMED Notices
YES
NO
9
Reminder to arm the alarm.
*Only in Manual Arming
YES
NO
10
Opened Door Warning
YES
NO
11
Channel 2
Electric Trunk
Dome Light
30 second
Electric
window
lifter
12
Anti-hijacking by Door
Close Door
Opend Door
13
FABRIC RESET
SI
14
Witnessed Anti-carjack
(Additional Transmitter)
OFF
ON
15
Programmed controls identifier
(P.C.I.)
ON
OFF
* Example to do the Programming:
a. Select the functions to be changed. (It is recommended to write down them to avoid
mistakes)
b. If you are going to work with 2 or 3 functions, follow these steps:
c. Function # 2: Press valet switch twice and then select
button 1
.
d. Then, if you wish to program, function #4, press twice again the valet switch (to
complete the # 4) then select
button 2
of the remote control.
e. And then, if you also want to program function # 8, press four times the valet switch (to
complete the # 8), select the
button 2
of the remote control.
IMPORTANT: Going from one function to another, just press the valet switch the
number of times necessary to complete the following function.
DETAILS OF THE PROGRAMMING FUNCTIONS
1. LOCK CLOSURE WITH AUTOMATIC ARM
If we programmed the Automatic Arming function (JUMPER 1), the alarm will arm by itself,
so with this function 1 we can choose to unlock or lock the doors.
2. DOORS’ SIGNAL ARMING DELAY
This function allows us to arm the alarm even when the dome lights are on, because the
system will not recognize this signal for the programmed time, avoiding notices of open
door when the alarm is armed.
