ENGLISH
Genius Car Alarm
www.geniuscaralarm.com
29
Genius Car Alarm
www.geniuscaralam.com 7
DUAL-STAGE SHOCK SENSOR
If the vehicle receives a
light impact
, the siren will chirp and the lights will flash 5 times
each. If the vehicle receives a strong impact, the siren and the lights will trigger for 30
seconds.
*The sensitivity can be adjusted.
ANTI-HIJACKING BY IGNITION (Programmable by Jumper)
This function is in the memory’s software to activate automatically the anti-hijacking mode
every time the ignition key is turned form OFF position to ON position. (See Jumpers table)
ANTI-HIJACKING BY TRANSMITTER (Programmable)
This function is used to immobilize the vehicle in case of emergency, pressing the buttons
1 and 2 simultaneously for 3 seconds and the anti-hijacking mode will activated by
transmitter. (See Functions Programming Table)
ANTI-HIJACKING BY DOORS (Programmable)
With the ignition key in ON position, open driver’s door and the anti-hijacking mode by door
will be activated. You must connect the wire of anti-hijacking by door. (See Functions
Programming Table)
WITNESSED ANTI-CARJACK (Additional transmitter necessary)
This function is used to immobilize the vehicle in case of emergency by
simply separating the additional transmitter while the engine of the
vehicle is working, 60 seconds after the signal disappears, the lights will
flash twice, The LED indicator will start blinking indicating
the anti-carjack has been activated, if the acoustic warning is
programmed, the siren will sound twice.
This function is programmable (see function programming chart).
For the witnessed anti-carjack to function, the additional transmitter must
be acquired. It must be programmed in the alarm system memory and
enable function in the function chart.
Turning on the transmitter
Press the button on the transmitter and hold it, the LED indicator on the
transmitter will turn on and off, after 3 seconds the LED on the transmitter will turn on for 2
seconds. Let go the button on the transmitter.
The transmitter will send a signal to the receiving module (Central Unit) every 6 seconds.
When the internal battery of the transmitter is dead, the LED transmitter will warn you by
continuously blinking. You must replace the batteries of the transmitter.
Turning off the transmitter
Press the button on the transmitter and hold it, the red LED on the transmitter will flash
once, after 3 seconds, the LED of the transmitter will flash 5 times. Let go the button of the
transmitter.
ANTI-HIJACKING SEQUENCE
When the system enters in anti-hijacking mode,
a.
0 to 15 seconds
, nothing happens (See Functions Programming Table, function 9).
Optional
witnessed
transmitter
