BLIZZARD 400-800 C ENC
32
532104 - Rev.A
1
2
5 0
Tr
ansla
tion of the orig
inal instruc
tions
ENGLISH
12. INSTRUCTIONS FOR USE
12.4 MANUAL OPERATION
!
Before performing the release operation, shut off the power supply
to the automation.
During manual operation, gently guide the leaf the whole way. Do not
push it and let it slide freely.
Do not leave the gate with the release engaged: after moving it manu-
ally, restore automatic operation.
RELEASE MANOEUVRE
1. Open the plastic cap on the release device (
2. Turn the lock clockwise using a coin or your personalised key
(
-1).
3. Turn the knob clockwise (
-2).
RESTORING AUTOMATIC OPERATION
1. Turn the knob anticlockwise.
2. Turn the lock anticlockwise.
3. Manually move the gate until the mechanical system engages.
Environmental phenomena, even occasional, such as ice, snow and
strong wind may hinder correct operation of the automation and
affect component integrity and may become a potential source of
danger.
12.1 SAFETY RECOMMENDATIONS
Installations using GENIUS BLIZZARD 400-800 C ENC series gearmo-
tors are designed for use with vehicular traffic.
The user must be in good physical and mental health and be aware of
and responsible for the dangers which use of the product can lead to.
!
- Do not remain in or walk/drive through the area of operation of the
automation system while it is moving.
- Do not use the automation system when the area of operation is not
free of persons, animals or objects.
- Do not allow children to approach or play in the area of operation of
the automation system.
- Do not try to prevent the movement of the automation system.
- Do not climb on, hold onto or let yourself be pulled by the leaf. Do
not climb onto or sit on the gearmotor.
- Do not allow the devices to be used by anyone who is not specifically
authorised and trained to do so.
- Do not allow the devices to be controlled by children or persons with
mental and physical deficiencies unless they are supervised by an adult
who is responsible for their safety.
- Do not use the automation system with the fixed and/or mobile
guards removed or altered.
- Do not use the automation system in the presence of faults which
could compromise safety.
- Do not expose the automation system to corrosive chemicals or
atmospheric agents; do not expose the gearmotor to water jets of
any type or size.
- Do not expose the automation system to flammable gases or fumes.
- Do not perform any work on the components of the automation
system.
12.2 PRODUCT WARNINGS
Risk of fingers and hands being trapped between the rack, pinion and
).
12.3 EMERGENCY USE
In any case the beam is not behaving properly, in emergencies or
if there is a fault, turn off the power supply to the automation and
disconnect the buffer batteries if there are any. If the leaf can be
moved safely by hand, use the MANUAL OPERATION mode; otherwise
place the automation out of service until it has been reset/repaired.
In the case of a breakdown, the automation must be reset/repaired
exclusively by the installer/maintenance technician.
Summary of Contents for BLIZZARD 400 C ENC
Page 1: ...BLIZZARD 400 C ENC BLIZZARD 800 C ENC...
Page 33: ......
