Genie Z-34/22IC, Service Manual

Page: 68 / 185

3 - 44 Z-34/22 IC Part No. 128267
July 2007 Section 3 • Scheduled Maintenance Procedures
REV A CHECKLIST D PROCEDURES
8 Fully retract the primary boom. Raise the
primary and secondary booms to full height.
Visually inspect the the dial indicator to be sure
the needle returns to the "0" position.
9 Remove the dial indicator and rotate the
turntable 90°.
10 Repeat steps 4 through 9 until the rotation
bearing has been checked in at least four
equally spaced areas 90° apart.
11 Lower the primary and secondary booms to the
stowed position and turn the machine off.
12 Remove the dial indicator from the machine.
D-7
Perform Engine Maintenance
Note: Engine specifications requires that this
procedure be performed every 1000 hours or
annually, whichever comes first.
Required maintenance procedures and additional
engine information is available in the
Kubota D905 Operator's Manual
(Kubota part number 16622-8916-5) OR the
Kubota DF752 Operator's Manual
(Kubota part number EG601-8916-1) OR the
Perkins 403C-11 User's Handbook
(Perkins part number 100816460).
Kubota D905 Operator's Manual
Genie part number
31743
Kubota DF752 Operator's Manual
Genie part number
84250
Perkins 403C-11 User's Handbook
Genie part number
97360