Genie Z-34/22IC, Service Manual

Page: 37 / 185

Part No. 128267 Z-34/22 IC 3 - 13
July 2007 Section 3 • Scheduled Maintenance Procedures
REV A
5 Locate the grease fitting on the worm drive
housing.
a grease fitting
6 Pump grease into the gear until you see it
coming out of the side of the gear housing.
7 Grease each tooth on the outside of the
turntable rotation bearing.
Grease Specification
Chevron Ultra-duty grease, EP NLGI 2 (lithium based)
or equivalent
CHECKLIST A PROCEDURES
A-11
Perform Engine Maintenance -
Kubota Models
Note: Engine specifications require that this
procedure be performed every 200 hours.
Required maintenance procedures and additional
engine information is available in the
Kubota D905 Operator's Manual
(Kubota part number 16622-8916-5) OR the
Kubota DF752 Operator's Manual
(Kubota part number EG601-8916-1).
Kubota D905 Operator's Manual
Genie part number
31743
Kubota DF752 Operator's Manual
Genie part number
84250
a