Genie Z-34/22IC, Service Manual

Page: 114 / 185

4 - 42 Z-34/22 IC Part No. 128267
July 2007 Section 4 • Repair Procedures
REV A MANIFOLDS
Function Manifold Components, continued
The function manifold is mounted to the turntable under the ground control box.
Index Schematic
No. Description Item Function Torque
16 Solenoid valve, 2 position 3 way ....... P ........... Secondary boom up ............................ 8-10 ft-lbs / 11-14 Nm
17 Solenoid valve, 2 position 3 way ....... O ........... Turntable rotate left ............................. 8-10 ft-lbs / 11-14 Nm
18 Solenoid valve, 2 position 3 way ....... L ........... Platform level up ................................. 8-10 ft-lbs / 11-14 Nm
19 Solenoid valve, 2 position 3 way ....... T ........... Primary boom extend .......................... 8-10 ft-lbs / 11-14 Nm
20 Solenoid valve, 2 position 3 way ....... S ........... Primary boom down ............................ 8-10 ft-lbs / 11-14 Nm
21 Solenoid valve, 2 position 3 way ....... Q ........... Secondary boom down ....................... 8-10 ft-lbs / 11-14 Nm
22 Solenoid valve, 2 position 3 way ....... N ........... Turntable rotate right .......................... 8-10 ft-lbs / 11-14 Nm
23 Orifice, 0.052 inch / 1.32 mm ............ X ........... Turntable rotate circuit
24 Solenoid valve, 2 position 3 way ....... M .......... Platform level down ............................ 8-10 ft-lbs / 11-14 Nm
25 Orifice, 0.052 inch / 1.32 mm ............ W .......... Turntable rotate circuit