SY-SIX-CTRL-DIN-1D | Synergis IX DIN Rail Single Door Controller | Installation Manual
Last Updated August 2018
21
7. Click
Refresh
to update the list and display the new addresses. The addresses change from red to grey
to show that they have been read back from the Controller.
If the address has not changed, check the module is online and communicating and that is has
finished attempting to register.
If the address has changed but the module is not shown as registered, check the address is in the
valid address range and that it is not a duplicate of another modules address.
Once all modules are online and registered with the desired addresses, the addressing process is
complete.
