SY-SIX-CTRL-DIN-1D | Synergis IX DIN Rail Single Door Controller | Installation Manual
Last Updated August 2018
32
LED Indicators
The Controller includes comprehensive diagnostic indicators that can aid the installer in diagnosing faults and
conditions. In some cases an indicator may have multiple meanings depending on the status indicator display
at the time.
Power Indicator
The Power indicator is lit when the correct input voltage is applied to the Controller.
Note that this indicator may take several seconds to light up after power has been applied.
State
Description
On (green)
Correct input voltage applied
Off
Incorrect input voltage applied
Status Indicator
The Status indicator displays the status of the Controller.
State
Description
Flashing (green) at 1 second intervals
The Controller is operating normally
Fault Indicator
The Fault indicator is lit any time the Controller is operating in a non-standard mode. During normal operation
the fault indicator is off.
State
Description
Off
Controller is operating normally
On (red)
Controller is operating in a non-standard mode
