Genesis KBE2, Installation And Operation Manual

Page: 38 / 56

38
Notes:
1. Setting F25 to “010” [50 Hz] will automatically set F05 to “001” [50 Hz] and F06 to “050” [50 Hz]. Setting F25 to “020” [6
0 Hz] will automatically set F05 to “004” [60 Hz]
and F06 to “060” [60 Hz]. 2. For Preset Speed #3, set F19 to “002”, F20 to “006”, and connect T
erminals 6 and 7 of T
erminal Bl
ock TM2 together
. *Settings of F01, F02, F04, F06,
and F07 can be changed while the drive is in the run mode.
Page
Number
45 45 45 46 46 47 47 47 48 48 48 48 51 51
Factor
y
Setting
8.0
100 002 005 003 000 000
0
000
20.0 30.0
001
— —
Function Range/Code 0.0 - 20.0 1 - 200 001: Jog
004: Coast-to-Stop
002: Preset Speed #1
005: Reset
003: Rapid Stop
006: Preset Speed #2
001: Jog
004: Coast-to-Stop
002: Preset Speed #1
005: Reset
003: Rapid Stop
006: Preset Speed #2
001: Run
002: Frequency Reached
003: Fault
000: Enable Reverse Run
001: Disable Reverse Run
000: Enable Auto Restart
001: Disable Auto Restart
0 - 5 010: Reset Drive for 50 Hz Constant T
orque Motor Operation
020: Reset Drive for 60 Hz Constant T
orque Motor Operation
0.0 - 200 0.0 - 200 000: Enable Automatic AC LIne Start 001: Disable Automatic AC LIne Start — —
Function Description DC Injection Brake Level (% Bus V
oltage)
Electronic Motor Overload Protection (I
2
t) (% Full Load)
Multifunction Input T
erminal 6
2
Multifunction Input T
erminal 7
2
Multifunction Output Relay (T
erminals 1, 2)
Reverse Enable/Disable Auto Restart (After a Fault Has Cleared) Number of Auto Restart Attempts Reset Drive to Factor
y Settings
1
Preset Speed #2 Frequency (Hz) Preset Speed #3 Frequency (Hz)
2
Automatic AC Line Start CPU Program V
ersion
Logs Last 3 Faults that Occurred
Function
Number
F17 F18 F19 F20 F21 F22 F23 F24 F25 F26 F27 F28 F29 F30
T
ABLE 15 – PROGRAMMABLE FUNCTIONS SUMMAR
Y LIST (Continued)
Sec. VIII – Drive Operation (Cont.)