Genesis COUPE BK 2010, Manual

Page: 73 / 168

Fig 1) 3rd gear in "D" range
Ͻ
It is difficult to do "STALL TEST" in 3rd gear, therefore Go to "Signal Check" as follow.
Monitor GDS Data
Ŷ Stall Test
Ŷ Signal Check
1. Connect GDS.
2. Engine "ON" .
3. Monitor the "INPUT & OUTPUT SPEED SENSOR" parameter on the GDS.
4. Accelerate the Engine speed until about 2000 rpm in the 3rd gear.
Specification : INPUT SPEED - (OUTPUT SPEED × 3rd GEAR RATIO)
•
200 RPM
5. Does "INPUT & OUTPUT SPEED SENSOR" within specifications?
ُ Go to "Component Inspection" procedure.
ُ Check for electrical niose of circuit in INPUT & OUTPUT SPEED SENSOR or Replace INPUT &
OUTPUT SPEED SENSOR. Repair as necessary and Go to "verification of vehicle repair" procedure.
Component Inspection
1. Connect GDS.
2. Engine "ON" .
3. Monitor the "OIL PRESSURE. S/W 1,2,3,5,6" parameter on the GDS.
4. Move select lever to "D" range and operate vehicle within 3rd gear condition.