8
Lens Connector
When using an auto IRIS lens, connect the lens cable to the lens plug.
•
Video IRIS type lens :
Set lens switch to VIDEO, and put the lens cable into the lens connector.
If the plug on the cable is a different type, replace it with the provided 4-pin
iris plug.
•
DC IRIS type lens
:
Set lens switch to DC, and put the lens cable into the lens connector.
If the plug on the cable is a different type, replace it with the provided 4-pin
iris plug.
•
Pin Assignment
•
VIDEO Iris type Lens
•
DC Iris type Lens
Pin No.
1
2
3
4
Signal
+9V DC (50mA max)
NC
Video
GND
Pin No.
1
2
3
4
Signal
Damping coil(-)
Damping coil(+)
Drive coil(+)
Drive coil(-)
Note
:
When using the Auto iris lenes, set-up switch to A.I position on the rear panel.
Auto iris lens can not be operated properly if the switch is set for E.E.
