7
1. Video output connector
BNC connector that outputs a composite video signal.
2. DC Iris level
Adjusts the lens iris level when using a DC(direct drive) type auto iris lens.
3. V-Phase adjust
Adjusts the phase when cameras are using the line lock function.
4. Setup switch
Switch for camera setup according to the operating circumstances. See page 11~13.
5. Power input terminal
Connect to 12VDC or 24VAC power source. When operating with 12VDC or 24VAC power supply, use
only an isolated power source. (Be sure not to connect the power source until all other connections are
completed)
6. Lens select switch
When using an auto IRIS lens, set the switch according to the lens type.
VIDEO : Set to this position when using a Video type lens.
DC : Set to this position when using a DC (galvanometric) type lens.
7. Video Voltage Adjust (Option)
Allows the video output of the camera to be increased when driving long cable runs.
