12
• L.L/INT(Line-Lock/Internal)
Line lock or internal sync mode are automatically selected by the type of power supply used to power
the camera.
When using the camera in line lock mode(with an AC supply) it is possible to adjust the V phase
alignment between 0 and 270 degrees.
Note
:
At the L.L setting, the camera’s vertical synchronization is driven by the AC signal supplied by AC
PSU.
• When in line lock mode the camera synchronization may not be correct for a few seconds after
power up. This is normal.
• If horizontal lines rolling upward or downward observed from the screen, reverse the polarity of
the power cable connected to the power input connector.
