076R200-000
SpectraComm IP Router Card
3-1
Issue 2
Installation and Operation Manual
Chapter 3:
SC-IP Configuration
SC-IP Configuration Overview
SC-IP configuration is performed through the web interface or through the command line interface
(CLI). You can execute CLI commands at a hyperterminal connection, through a Telnet connection
or at the web interface. A brief overview of CLI is provided below. For a detailed guide to Smart
CLI, including command tables, context-sensitive help, and practice exercises for configuring
typical networks, refer to Appendix B:
CLI Reference
.
Note
For an introduction to the web interface, refer to Chapter 4:
The Web Interface
).
Command Line Interface (CLI) Basics
The SCIP command line interface is an interactive means of configuring the SC-IP through a Telnet
session over the LAN/WAN, PSTN, or by typing commands at a VT100-compatible ACSII
terminal connected to the SC-IP
CRAFT
port. The CLI is a smart, controlled-access interface that
provides general and context-sensitive help, automatically expands abbreviated command or
subcommands and also anticipates any required command arguments. The CLI will prompt for any
required argument that is missing from a command line.
Smart CLI Quick Reference
•
Get context-sensitive command help by using the
?
character in the CLI command string or
by referring to the commands, parameters and arguments in
Appendix B, CLI Reference
.
•
Type
?
at the command prompt to view a description of IP and Utility commands (shown
below). If you are in User mode, several of the commands shown below will not display.
_______________________SpectraComm IP Commands______________________
clear Reset functions
configure Configure system parameters
connect Connect to terminal interface or modem
default Default configuration to factory values.
disable Turn off supervisor/admin commands
enable Turn on supervisor/admin commands
help Description of the command line interface and help system
ping Send ping to remote device
show Show system parameters
_______________________Utility Commands______________________________
batch Store and/or run commands in batch mode
exit Exit SpectraComm IP Command Line Interface
flash Copy flash files/select flash boot file
reboot Halt and perform a reboot
tftp Enable/Disable TFTP Server (supports flash upgrade)
tutorial Display tutorials for SCIP
•
Execute each command string by pressing the
Enter
key (or <
cr
>).
Summary of Contents for SC-IP
Page 1: ...6SHFWUD RPP 3 ROUTER CARD Installation Operation Manual 076R200 000 Issue 2 October 2002...
Page 89: ......
Page 90: ......