Use and Maintenance Manual
MONOBLOCK Vacuum Unit
>>> General safety information
3
1. General safety information
Read this manual carefully before starting operations of movement, unpacking, installation,
use, maintenance and decommissioning of the MONOBLOCK vacuum unit.
A copy of this manual is available on the website:
1.1 Purpose of this manual
This installation, use and maintenance manual is an integral and essential part of the MONOBLOCK vacuum
unit.
Its purpose is to provide all necessary information to allow the installer to install the system in full
compliance with the manufacturer’s specifications, the user to oper
ate the system in the safest and most
independent way, and maintenance technicians carrying out programmed maintenance operations to
ensure the correct operation of machinery and the system as a whole.
The manufacturer declines all liability for damage deriving from failure to observe the instructions given in
this manual. In case of doubts on the correct interpretation of instructions, contact the manufacturer to
receive the necessary explanations.
1.2 Composition of the manual and consultation details
This installation, use and maintenance manual is composed of chapters divided into sections, identified by a
progressive numbering system at the start of each different topic. Italian is the language of the first release.
The table of contents lists the chapters and sections, allowing the desired topic to be easily found.
The following symbols are used in this manual to indicate and highlight particularly important parts of the
manual that must not be ignored:
DANGER - ATTENTION
Denotes situations of extreme danger that if ignored could create serious risks for the
health and safety of persons.
CAUTION
Denotes that suitable conduct must be followed to avoid accidents and/or causing
economic damage.
INFORMATION
Denotes technical information of particular importance that must not be ignored.
The descriptions and illustrations provided in this manual are not binding. General D’Aspirazione reserves
the right to make any modifications it deems necessary at any moment, without any obligation for prior
notification.
The total or partial reproduction of this document without the consent of the manufacturer is prohibited.
