1-800-345-8207
19
Section 9 - Nitrogen Control Module
The Nitrogen Control Module is a built in PLC used to control the nitrogen generator and provide useful information on
alarms, compressor operating hours, cycles and nitrogen solenoid operation.
Normal operation does not require any operator input. The
display should read “Nitrogen Generator Normal” unless the
generator is in alarm or log display mode. To access the panel
flip the casing up.
PLC Operation
To view the log display information:
• Press the Alt Key and then Press the down arrow. Press the Alt Key again.
• Use the UP and DOWN arrow key to scroll through the log screens below.
• To get out of the log press ALT then up arrow, and press ALT again to get to main display
