Chapter 4 - Final Checkout
69
© 2017
GM1212 Geist Watchdog Wi Instruction Manual
Humidity Under
Enter a low humidity alarm threshold - if the humidity drops below
this value, a low humidity alarm is generated. Check the box to
activate the option, and enter a humidity value.
Alarm Delays
The number of seconds that pass between the time the system
goes into alarm and the time that alarm is announced. Check the box
to activate the option, and enter a time interval.
Offline Delays
Users can designate how many minutes must pass before the
Watchdog Wi considers the sensor offline. Check the box to activate
the option, and enter a time interval.
Global Warning Settings - There is a check-box next to each individual alarm setting.
Check this box to apply that particular setting to each sensor in the system. If you do not
check the check-box next to the alarm parameter, that value will not be applied to the
sensors in your system.
Temp. Over
Enter a high temperature warning threshold - if the temperature rises
above this value, a high temperature warning is generated. Check
the box to activate the option, and enter a temperature value.
Temp. Under
Enter a low temperature warning threshold - if the temperature drops
below this value, a low temperature warning is generated. Check the
box to activate the option, and enter a
temperature value.
Humidity Over
Enter a high humidity warning threshold - if the humidity rises above
this value, a high humidity warning is generated. Check the box to
activate the option, and enter a humidity value.
Humidity Under
Enter a low humidity warning threshold - if the humidity drops below
this value, a low humidity warning is generated. Check the box to
activate the option, and enter a humidity value.
Warning Delays
The number of seconds that pass between the time the system
goes into a warning state and the time that warning is announced.
Check the box to activate the option, and enter a time interval.
Users
The Watchdog Wi allows you to configure user privileges for up to eight unique users.
User 1 is always the Administrator’s slot. Use users 2 - 8 to either configure users with
read only access, or to configure additional Admin accounts.
