Geist Watchdog Wi Instruction Manual
36
© 2017
GM1212 Geist Watchdog Wi Instruction Manual
Individual Sensor Configuration
If you’d prefer not to use the global settings, you can configure your sensors one at a
time. You can configure the parameters sensor by sensor. Remember to click the Save
Changes button on each page to apply the settings.
Sensor Mounting Tips
The electronics in Watchdog Wi sensors are not waterproof. Watchdog Wi sensors need
to be mounted in a safe location where they will not come into contact with water or
condensation.
Sensors can be secured with magnets (included), screws, zip ties, or on a 15mm DIN rail.
Each sensor’s serial number is unique, and you will need to refer to this number
throughout the life span of the sensor. When you mount the sensor, ensure that the
sensor’s serial number is accessible.
Although each sensor has a unique serial number, the Watchdog Wi will also assign each
sensor an index number. This is listed as the ID # in the upper right corner of each
sensor’s individual configuration page. If you’d like, place a label or other marking on the
sensor case to show its index number.
Figure 3-10
Sensor Serial Number and Index Number
