Chapter 3 - Installation
29
© 2017
GM1212 Geist Watchdog Wi Instruction Manual
Antenna
The Watchdog Wi is shipped with three 900 MHz antennas. Plug each antenna into its
appropriate jack on the back of the Watchdog Wi and tighten the connections firmly.
Figure 3-6
Antenna Connections
Once the antennas are secure, you’ll need to ensure proper antenna position. Antennas A
and B can be close together, but to avoid signal interference they both need to be as far
away from antenna C as possible. Extend the leader cables on the antennas to their fullest
lengths and secure the antennas as far away from the Watchdog Wi, and as high off the
ground as possible.
Windows
·
Windows 2000 / XP / Server 2003:
Click the
Start
button, choose
Settings
, then
Network Connections.
·
Windows 7 / Server 2008:
Click the
Start
button, then choose
Control Panel
>>
Adjust Your Computer's Settings
>>
View Network Status and Tasks
>>
Change Adapter Settings
.
(Alternatively, on some Windows 7 machines, this may be
Start
, then
Settings
>>
Control
Panel
>>
Network and Sharing Center
>>
Change Adapter Settings
.)
·
Windows 8 / Server 2012:
Move the mouse cursor to the bottom or top right corner of the screen, click the
Settings
icon, then select
Control Panel
. Change the view type from
Category
to
Large
or
Small
Icons
if necessary, then select
Network and Sharing Center
, then
Change Adapter
Settings
.
·
Windows 10:
Click the
Start
button, then choose
Network & Internet
, then click
Change adapter
options.
