page | 39
3. Now let’s connect another 3.5mm-to-3.5mm mini-stereo cable between the
Line Out
jack on the computer and the
Line In
jack on the Sender unit.
4. Finally, we’ll connect our computer speakers to the
Line Out
jack on the Receiver unit.
Unicast and Multicast Modes
Operating the DVI KVM over IP
Connect to
Line Out
on computer
Connect to
Line In
on computer
Sender unit
Connect to computer
speakers
NOTE:
When using HDMI sources with an HDMI-to-DVI adapter,
the HDMI audio will be passed through to the DVI Out connector.
However, if a 3.5mm-to-3.5mm mini-stereo cable is connected to
the
Line In
jack on the Sender unit, the embedded HDMI audio
is switched off. This allows the audio signal from the
Line In
jack
(Sender unit) to be received on the
Line Out
jack (Receiver unit).
WARNING:
DO NOT connect the cable from the
Line Out
jack on
the Sender unit to the
Mic In
jack on the computer. Doing so will
result in audio “clipping” and may cause damage to the sound card.
Summary of Contents for EXT-DVIKVM-LAN
