Gefen EXT-DVIKVM-LAN, User Manual, Page: 31 / 64

page | 21
Network Configuration
Operating the DVI KVM over IP
9. Click the OK button, then close all Control Panel windows.
10. Launch a Web browser and type in the IP address for the Sender unit. In our
example, the IP address for the Sender unit is
169.254.7.8
11. The Sender unit page will now be displayed.
Because we have already configured the IP address for the computer that will be
accessing the Web page for the Sender unit, we can also access the Receiver unit.
12. To access the Receiver unit, disconnect the network cable from the Receiver unit and
connect the computer directly to the Receiver unit. Once the computer is connected,
enter the IP address of the Receiver unit to access the Web interface on the Receiver
unit. As long as the Sender and Receiver units are within the same address range,
this procedure only needs to be performed once.
13. We can now proceed to change the network configuration to Static IP mode or DHCP
mode .
See the next page for details on configuring Static IP Mode and DHCP mode .