Gefen TOOLBOX GTB-MINI-PACS, User Manual

Page: 9 / 88

5
1 Power
This LED will indicate the current power state. The LED is green when the unit
is powered ON.
2 IR Sensor
The IR receiver is provided for the Mini PACS to learn new IR commands. Use
the Web Interface or Telnet for this procedure. See pages 17 - 29 for more
information.
3 IP Reset
This button is placed beneath the enclosure surface to prevent an accidental
reset. Use the end of a paperclip to press and hold this button for about 10
seconds to reset the unit’s IP address to
192.168.1.72 . This should only be
done if the Mini PACS is moved to a new network or cannot be located on the
network.
4 IR Emitters
Connect up to three (3) single or dual 12V IR emitters (Gefen part nos.
EXT-IREMIT / EXT-2IREMIT or other Xantech-compatible emitters) to these
ports to control A/V of other devices using one-way IR control. These outputs
are capable of transmitter IR signals with 30 - 60 kHz carrier frequencies.
5 12V DC
Connect the included 12V DC locking power supply to this receptacle.
6 IP Control
Connect the Mini PACS to a network in order to use IP control.
7 RS-232
This ports is used to control other devices via bi-directional RS-232 serial
control, using TCP or UDP bridging. This port may also be used with a Terminal
Emulation program for programming and controlling the Mini PACS (See
Appendix for details).
8 Relay Contacts
Two (2) NO relay contacts with +12V DC and Ground. The maximum current
draw from the 12V is 100 mA.
PANEL DESCRIPTIONS
NOTE: Only pins 2 (Receive), 3 (Transmit), and 5 (Ground) are used
for communication. A null-modem adapter should not be used with t
this product when connecting to controlled devices (see page 77 for
connecting to a computer via RS-232).