manualshive.com logo in svg

Gefen TOOLBOX GTB-MINI-PACS, User Manual

Share
Download
Gefen TOOLBOX GTB-MINI-PACS User Manual Download Page 27

23

WEB INTERFACE

10. Find the IR remote for the new device.  Make sure the batteries are fresh! 

Hold the remote so it is pointing at the IR window on the Mini PACS, and is
about 6” away from the window.

11.  Click the “

Learn

” button for the fi rst named Command.

12. You will be prompted to press the remote button that matches the Command

Name you are learning.  Press the button fi rmly- do not hold it down, or just 
hit it quickly.

13. You will be prompted to press the same button a second time.  The Mini 

PACS will confi rm that the two codes match.  Some IR remotes use “toggle 
codes”, where the IR code toggles between two different codes each time
the button is pressed.  The Mini PACS will recognize this, and ask you to
press the button a third and fourth time.

23

Learning IR MODE Enabled:

Please have your remote control and get ready to press the remote key...

Please press the 4 button.

Please press the 4 button again.

1st and 2nd command captures were not identical, please press the 4 button 

with your remote.

Please press the 4 button again.

Learning IR MODE Enabled:

Please have your remote control and get ready to press the remote key...

Please press the 1 button.

Please press the 1 button again.

Summary of Contents for GTB-MINI-PACS

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands