Gefen TOOLBOX GTB-MINI-PACS, User Manual

Page: 62 / 88

58
RS-232 / TELNET COMMANDS
#set_end_del Command
The #set_end_del command sets the end-delimiter mode and value.
Syntax y :
#set_end_del param1 param2
Parameters:
param1 On / Off [0 - 1]
param2 Delimiter value [00 - FF]
Example: p
#set_end_del 1 B0
Notes:
If param2 is set to 0, then the start delimiter is turned “off”. param2 is used to 2
“enable” or “disable” the delimiter value.
#set_send_byte_cnt Command
The #set_send_byte_cnt command sets the end-delimiter mode and value.
Syntax y :
#set_send_byte_cnt param1
Parameters:
param1 Byte count [0 - 255]
Example: p
#set_send_byte_cnt 100
Notes:
Default value for param2 is 64. 2