Gefen TOOLBOX GTB-MINI-PACS, User Manual

Page: 31 / 88

27
WEB INTERFACE
6. Since this is a template fi le, the Command Names will be yellow, rather than
green. This means that only the names, and not the IR data, have been
stored.
7. Click on the “ Advanced View ” button above the Command Name list. This
adds the “ Learn ” and “ Delete ” buttons for each Command, and a button
named “ Learn ALL ” above.
8. Find the IR remote for the new device. Make sure the batteries are fresh!
Hold the remote so it is pointing at the “IR” window on the Mini PACS, and is
about 6” away from the window.
9. Click the “ Learn ALL ” button.
10. You will be prompted to press the remote button that matches the Command
Name you are learning. Press the button fi rmly- do not hold it down, or just
hit it quickly.
11. You will be prompted to press the same button a second time. The Mini
PACS will confi rm that the two codes match. Some IR remotes use “toggle
codes”, where the IR code toggles between two different codes each time
the button is pressed. The Mini PACS will recognize this, and ask you to
press the button a third and fourth time.