Gefen TOOLBOX GTB-MINI-PACS, User Manual

Page: 28 / 88

24
WEB INTERFACE
14. If the commands match, the Mini PACS will return to the main screen, and
the new command will now be green.
15. If a code is learned incorrectly, you may overwrite it by repeating steps 11 -
13. The Mini PACS will warn you that the command is already in memory,
and ask you to confi rm that you want to overwrite the existing code. Press
“
OK ” to do so. Once a Command is learned, its Command Name may not
be changed. If the name is incorrect, you must delete the Command Name,
and add a new command and re-learn the code.
16. Learn each command in turn by repeating the “ Learn ” procedure (after
entering each Command Name if necessary).
17. Press “ Test ” to verify that each command performs as expected (see
Step 6).
18. Press “ Save Changes ” to save the learned Commands to the Mini PACS.
Be sure to do this before navigating away from the page, or the changes
will be lost! You can leave the page after saving changes, and return later
to learn new commands, or test/modify existing commands. All named
commands
must be learned before saving the changes. Command names
that do not contain IR data will be deleted when changes are saved.
19. Once a new device has been learned, you should download the new device
IR fi le to your computer and save it. Press the “ Download IR File ” button to
do this.
20. Mini PACS will prompt to “ Open ” or “ Save ” the fi le. You probably should
click “ Open ” to see and check the fi le before saving it. A sample XML fi le is
shown on the next page.
ADVANCED: If you are familiar with editing XML fi les, you can
download the Confi g fi le, edit the XML fi le, and upload it again to the
Mini PACS. This is an advanced feature and not recommended for
new users.